Ik heb een bedrijfsruimte ingedeeld met diverse kantoorunits. Op de vloeren heb ik verschillende structuren en kleuren aangebracht, die keurig worden weergegeven in de 3D weergave. Met uitzon…

como faço pra recuperar minha conta já que a mensagem de recuperação não chega no meu email

Como coloco piso na casa?

Hi, great software -many thanks for all your efforts. Just wanted to flag up a couple of bugs.

Exporting to PDF: Doors opening out are mysteriously flipped (opening in the wrong direction …

HOE VOEG IK EEN DEUR IN,

I would like to add a balcony with a bed under the front door till the middle of the living room in studio flat. Ceiling height is 3.8m, so I can handle this part of the height of 2 meters. H…

I have just finished my 1st floor plan and want to send it to my documents, not to sure as to what to do, and don’t want to stuff it up and loose it!!!!

I have had this problem before. I want to draw but my cursor will not move over the floor plan. Do I need to update any program it requires?

(Español – Spanish)Pongo la piscina en mi proyecto en 2d, pero no aparece en 3d ¿Que hago para que aparezca?
(Inglés – English) I put the swimming pool in my project in 2d, but it does not a…

How do I make measurements show when I print the plan?

qui a déjà fait le plan d’un magasin LA HALLE. Merci

Hello,

I was wondering how do you set up for a parking spot.

I’m trying to add stairs that go down from the second floor (as stairs naturally do). I found the “regular” stairs going up that match my needs, but there is no corresponding “attic” stairs….

Hallo,

Hoe krijg ik van een plattegrond die ik heb gemaakt een .fml bestand? Welk type account heb ik daarvoor nodig?

I have a floorplan that I would like to upload and trace. It is a JPEG that is 632KB. When I go to upload it it says “invalid FML file”. Do I have to change something on the JPEG in order…

a friend of my send a floorplan to my email, i can open it, but i cannot put it on my account with the rest of my floorplans. how can i do that?

I have created a floor plan consisting of three levels. The upper and lower levels show, but the ground level does not show even though if said ‘LOADED’ at the top of the screen

Also when…

Een kopie van een ontwerp (beg gr > verd.) komt niet goed uitgelijnd t.o.v. een onderlegger uit. Ze moeten dan verschoven worden ten opzichte van elkaar. Hoe doe ik dat?

I have non-standard windows. They are at different elevations from the floor and various heights. When I try to edit the properties, the window does all kinds of strange things, ex: the width…

I started a plan and I can see the “thumbnail” but when I click on it a “select Adobe Flash Player” message pops up. It is already installed and I rebooted. How do I get back into my plan?

Hi floor planner staff
I have a bad thing in my account in the sidebar .
in my sidebar the icons disappeared,
Please help me to add them again

When I try to drop a door in, it goes behind the wall line and disappears although I’ve dropped them in other locations with no problem – what’s up?

Ik heb floorplanner ontdekt toen ik een plattegrond wilde gaan maken van een camping. Mijn vraag is, is dat mogelijk ?
Ik heb met mijn gps, van alle paden op de camping een gpx bestand gemaa…

How do I see first and second floors together in profile view not 3D?
That is to say, how do I attach first and second and third floors together in floorplanner

My condo has three rectangular support columns which protrude the walls into the interior floor space. How do I best add this feature to my existing walls?

example add a 3′×2′ support colu…

A few suggestions for the library:

1. A kitchen cabinet with a rounded corner for putting on the end of a series of cabinets. Probably need a right and left version
2. A stairway with a …

I am publishing a site to help sell a home. Here is the address to the floor plans on the site:
http://myportesuellohome.businesscatalyst.com/floor-plans.html

There are two problems:

1…

how to download a profial into flash drive

Hello there Folks, have just started with floorplanner…. A quick one…. Can one set the wall thickness ???? i.e. Inside is 110mm… outside 110 + 30mm airgap + 90mm brick veneer ….. Than…

Tenía hecho un proyecto en la versión gratuita del programa. Ahora que tenía que retomar en serio el proyecto y ampliarlo veo que ha desaparecido. No hay ningún proyecto en mi cuenta. ¿Se bor…